Traffic Engineering Cadd Standards (Microstation V8)

For some links on this page, MicroStation V8 CAD software is required.

Traffic Engineering V8 Cadd Resource Files

Sheets 1-B and 1-C are placed in the plan set after the Face Sheet and before the Design Sheet's. It is the Designer’s responsibility to check these sheets to assure they list the ADOT Standard drawings actually used in the design. If for some reason, you have approval to use an older Standard Drawing, the sheet may be edited to reflect the standard actually used. Signify that you have checked the sheet's, and they are correct by signing and dating the lower right corner. It is only necessary to include the sheet's, that list the standards actually used in the project. That is, if there is no Traffic Electrical in the project, then you would omit Sheet 1-C, Traffic Signal and Lighting Standard Drawings. Because Standard drawings are updated frequently, it is important to assure yourself that you have the most recent version of these sheets. Check the revision date on the web site.

---

View the Traffic Cadd Standards General Information Memo Dated: May 24, 2000

Traffic Cadd Standard Example Drawings with element information:

Note: These Traffic Cadd Standards are used in conjunction with the ADOT Cadd Standards and ADOT Drafting Guides for use in Office and Field (1990).

Traffic Engineering Cell Libraries:

Traffic Engineering Line Styles:

DOWNLOAD ALL FILES

LINKS:

Traffic Cadd FTP Site

TRAFFIC PLAN SHEET NOTES

Computer Aided Engineering Group

ADOT Roadway Engineering Group

 

Documents are posted as they become available in PDF format, which requires Adobe Reader to view.