InRoads Update
Version 8.9
Start Date: January
30, 2007
History
Author: Roadway Technical Support
Updates
include:
04-26-12
english_V89.itl
Added
Component Temporary Concrete Barrier>Traffic Std C-3
03-06-12
english_V89.itl
Added
Component 42” Half Barrier Std C-10.53 – 2.5’ Wide
11-14-11
Drainage -
Implemented StormCAD
10-20-11
Installed
Drainage Applications - WMS, HEC-HMS, HEC-RAS, HY8 and Hydraulic Toolbox on New
Workstations
10-25-11 to
11-07-11
New Windows 7
64-bit HPZ400 WorkStations
09-09-11
Bentley
Bash
08-22-11
Revised
InRoads Super tables
June 2010 to July
2011
Roadway
InRoads Training
02-08-11
english_v89.itl
Components>Curbs>Type
A
Single Curb –
Type A and A-1
Change – No
Slope
Components>Curbs>Type
G
Single Curb –
Type G
Change – No
Slope
Components>Curbs>Median
Section
Highways>Fringe-Urban
Highways
IS1, IS1 Lt
and IS1 Rt
Highways>Urban
Highways
UA, UA Lt and
UA Rt
Templates
(Finished)
IS1 with
EC
UA with
EC
The change
was the Median Width, it was 16’ from the Lip of Gutter
to Lip of Gutter revised to 16.5833’.
These changes
came about because of the 16’ Face of Curb to Face of Curb PG 300-22 of the
Roadway Design Guidelines
which means Roadway Width to Roadway Width.
See Std C-05.10 for more information about the Roadway
Width Location.
Radii shown
on Curbed Sections shall also be called out to that point (Roadway
Width).
11-29-10
roadway.xin
Geometry>View Geometry>Vertical
Annotation
Changed preferences: Default,
exst100CL and new100_CL
Affixes tab:
Sag Sight Distance Prefix to SDh=
Crest Sight Distance Prefix to
SDs=
11-05-10
notes.dft
Cross Section Note>Created New
Missing Slope
Named Symbology to New Missing X-Section
Slope
Documentation in How To Guide 3
roadway.xin
Named Symbology>New Missing X-Section Slope, changed text
weight to 4
09-21-10
roadway.xin
Reverted PSS and Design Symbology back because there was not enough contrast between
existing and new components
Revised Symbology=PSS
Cross Section Line lv/co=35, lc=0, wt=3
Cross Section Text lv/co=36, lc=0, wt=4
Revised Symbology=Design
Cross Section Line lv/co=57, lc=0, wt=3
Named Symbology Manager, Created New Symbology
New Drafting Notes that
Plot
Default Line lv/co=33, lc-0 and wt=1
Default Text lv/co=33, lc-0 and wt=1
notes.dft
Set New Drafting Notes that Plot for
Plan, Profile and Cross Section
07-26-10
roadway.xin
Create Cross Sections>Revised all
preferences>Include>
Toggled Off, Components, Annotation
and Volumes
Toggle On, Crossing
Features
More information available in Creating
Cross Sections – 2008
07-19-10
roadway.xin
Revised Symbology=Design
Cross Section Line lv/co=20, lc=0, wt=3
07-15-10
english_v89.itl and roadway.xin
Revised Symbology=PSS
Cross Section Line lv/co=20, lc=0, wt=3
Cross Section Text lv/co=21, lc=0, wt=4
07-01-10
english_v89.itl
Components>Median Barrier –
Updated>Half Barrier – New
Points for Half Barrier, Added to
Point name List
THBLGSG – Template Half Barrier - Lip
of Gutter (Bottom)
TBHBSG - Template Back of Half Barrier
(Bottom)
TBHBFG - Template Back of Half Barrier
(Top)
TFHBT - Template Face of Half Barrier -
(Top)
TFHBAPT - Template Face of Half
Barrier - Angle Point (Top)
TFHBAPB - Template Face of Half
Barrier - Angle Point (Bottom)
TFHBB - Template Face of Half Barrier
- (Bottom)
roadway.xin
Created Styles for each referenced
above
Vertical Annotation>exst100_CL and
new100_CL, verified control point cells
Style Manager>Initialized Profile
Lines for exst100_CL and new100_CL
Verified that Default matches
new100_CL
(Style, Symbology and
Preference)
August 2010 to July
2010
Roadway
Drainage Training – MicroStation, InRoads and InRoads Storm and
Sanitary
June 2010 to May
2010
US95 Training
– Widening Left and Right, Templates, New Vertical,
Phasing
May
2010
english_v89.itl
Removed all Old information from
template library
roadway.xin – no change
January 2010 to
October 2009
Loop303
Training
Feature Name
Overrides
Parent/Child
Components
Templates/End
Conditions
Style and Symbology Managers
Crossroads
September
2009
english_v89.itl
Fixed error
in Templates …Highways\Rural Highways\RB (not symmetric)
and …Templates (Finished)\RB with EC (not
symmetric)
July
2009
Finished
Install of InRoads Service Pack 3 - 08.09.03.06 on all Roadway
Computers
June
2009
Installed Service Pack 3 – Version
08.09.03.06 for testing
April
2009
english_V89.itl
Changed 3’ width to 2.708333’ width
for Components>Curbs>Type G>Type G
Changed cell named “TypeGCG” in the InRoads Cell
Library to match
preferences.xin
Change to Symbology Manager>New Sawcut
Line
Added Cross Section Point – ac=point,
lv=304, as=1
Revised InRoads_V89 preference
filename from "preferences.xin" to "roadway.xin"
February 2009
preferences.xin
Changed Preferences: Default,
new100_CL
Geometry>View
Geometry>Horizontal Annotation>Styles tab
Changed PI from NAP to HPNAP, so it
would display lv=28
english_v89.itl
Changed Highways>Widening
templates>Widen Lt and Widen Rt
TLOEPSG and TROEPSG now Horizontally
and Vertically Constrained from TLOEPFG and TROEPFG
InRoads V8i Update with Joe Waxmonsky – Bentley
December 2008
english_V89.itl
End Conditions>Urban
Slopes>Changed UD (1) and UD (2)
Ditch Bottom to 8.5' from 10' -
because of 10' being from Gutter Flowline
In Fill the Hinge Component states in
the description: must change catch point for PSS thickness
Changed Templates (Finished) UD (1)
with EC and UD (2) with EC for Revision to Fill End
Conditions
Bentley Released InRoads Service Pack
3 - 08.09.03.06
November 2008
preferences.xin
Evaluation>Volumes>End-Area
Volume
Toggled On Cubic Yards for all preferences:
Default, Alternate A, Alternate A - Left, Alternate A - Right,
Alternate B and Shapes and
Annotation
October 2008
Completed 6
more weeks of InRoads – Roadway Training
September 2008
preferences.xin
Deleted 24
unnecessary Preferences from the Preference Manager,
see Preference_Manager.xls
Revised
SurveyRequest.doc for InRoads_V89 DTM reqiurements
Started 6 more weeks of InRoads –
Roadway Training every Tuesday and Thursday at 10am and 1pm.
(Duration
varies 1 to 1.5 hours) Refer to Calendar 2.pdf for subject
matter
August 2008
english_V89.itl
Removed any
occurrence of Closed Shapes for Non-Closed Shapes
July 2008
Deleted
new50_CL preference from Geometry>View
Stationing>Preferences
June 2008
Started 11 weeks of InRoads – Roadway
Training every Tuesday and Thursday at 10am and 2pm.
(Duration - 1
hr.= 1 PDH Hour per class) Refer to Calendar #1.pdf for
subject matter
May 2008
Finished
Install of InRoads Service Pack 2 - 08.09.02.16 on all Roadway
Computers
April
2008
Distribution
of InRoads_V89 resources on the Web:
Roadway\Dev\Directory_seed\InRoads_V89\english_V89.itl
Roadway\Dev\Directory_seed\InRoads_V89\preferences.xin
Roadway\Dev\help\InRoads_V89\Readme_V89.htm
Roadway\Dev\InRoads_V89\super
Roadway\Dev\InRoads_V89\XML Data
Roadway\Dev\InRoads_V89\ADOT_Roadway.reg
Roadway\Dev\Celllib\InRoads.cel
03-25-08
(preferences.xin)
Evaluation>Volumes>Mass-Haul
Diagram
Deleted
Preferences
100scale, 1scale, 20scale, 30scale,
40scale
Developed
Preferences
Default and
Mass-Haul
03-14-08
(preferences.xin)
Named Symbology Manager
Name: Design
Default Line to lv/co=59, lc=0, wt=1
Profile Line lv/co=57, lc=0, wt=1
Cross Section Line lv/co=57, lc=0, wt=1
Name: Default
Cross Section Line lv=59, co=69, lc=0, wt=1
(english_V89.itl)
Templates:
Re-defined UD (1) Lt and Rt, UD (1) and UD (1) with EC
Re-defined UD (2) Lt and Rt, UD (2) and UD (2) with
EC
March
2008
InRoads
Version 08.09.01.45 – Finished Install in Roadway Design
02-12-08
Bentley
Released InRoads Service Pack 2 - 08.09.02.16
February
2008
Update to
Templates:
(english_V89.itl)
Modified for
parametric constraints
…Highways>Rural Highways>RA, RA
Lt, RA Rt, RB and
RC
…Highways>Fringe-Urban
Highways>IS1, IS1 Lt, IS1 Rt, IS2, IS3 Lt, IS3 Rt and
IS3
…Highways>Urban
Highways>UC
…Highways>Widening>Alternate
Widen Left and Alternate Widen Rt
…Templates
(Finished) IS1 with EC, IS2 with EC, IS3 with EC, RA with EC, RB with
EC,
RC with EC
and UC with EC modified for changes to templates and end
conditions
Update to
Preferences:
(preferences.xin)
Changed all
Horizontal Stationing Preferences not to display events
Cogo Points, Default, Exst EP, exst100_CL, exst100_RW, New EP, new100_CL,
new100_RW and Sawcut
Changed all
Tracking Preferences to Display with the same Tracking Symbology
Left Offset
Prefix From Off to Lt, Right Offset Prefix From Off to Rt
Default,
exst100_CL, new100_CL and Sawcut
Update to
Templates:
(english_V89.itl)
Changed
Name
from …Highways>Widening>Alternate
Widen Left and Alternate Widen Right
to …Highways>Widening>Widen Lt and
Widen Rt
Added point
TCLFG to both
New Component
- Simple (Exst EP) from TCLFG to
TLSCFG
New Component
- Simple (Exst EP) from TCLFG to
TRSCFG
Update to
Preferences:
(preferences.xin)
Style
Manger
Toggled On,
Surface Feature for New EP and Exst
EP
January
2008
Development
of How to Use the Horizontal Element Commands
Update to End
Conditions:
(english_V89.itl)
…Standards
Slopes>C-02.10, C-02.20 and C-02.30
…Urban
Slopes>UD (1) and UD (2)
Removed possibility of sliver cut and fill
slopes
December
2007
InRoads
Training Version 8.9 – Manual 2 is now available
Annotate
Cross Sections>Finished Grade Centerline Elevation – fixed elevation
readout
Symbology Manager>Cross Section Point –
cell=point
November 2007
Development
of InRoads Training Version 8.9 – Manual 2
Development
of How To’s
October
2007
preferences.xin
Changed
Default Style – Cross Section Line to co=69
This change
means existing surfaces will still need to be style=ground
InRoads
Training Version 8.9 – Manual 1 is now available
August
2007
08-06-07.xin
Added New
Median Barrier Style and Symbology
08-06-07.itl
Added
Component Folder "Median Barriers"
Created 3
Components:
Mod Bentley
Jersey Barrier
42" Type F
with AC
42" Type F
with AC1
NOT
COMPLETE
08-29-07.xin
Style
Manager>Edit Style>Surface Feature>Settings>Toggled Off
Components
Cut, Ditch
Bottom, Fill, TLOHSG and TROHSG
Display of Components
are
optional
but should be used for curb, structural
sections, etc. not outside slopes
It leads to
the display 2 lines, it should show Subgrade Only
Roadway
Designer>Create Surface:
Deleted
preference Finished
Created
preference Design
07-12-07
Bentley
Released InRoads Service Pack 1 - 08.09.01.45
July
2007
07-01-07.itl
Created subfolder to
organize the library
Components
End
Conditions
Highways
My
Project
Templates
(Finished)
Point Name List is
still the same as 05-01-07.itl
07-09-07.itl
Added to itl point name list
TLOSFG
TROSFG
Changed
Highways>Rural Highways>
RC
RB
From TLOSFG to
TLOEPFG
From TROSFG to
TROEPFG
Changed Templates
(Finished)
RC with
EC
RB with
EC
From TLOSFG to
TLOEPFG
From TROSFG to
TROEPFG
June
2007
InRoads Training
Provided by Zen Engineering
preferences.xin
Style Manager>TLOSFG and
TROSFG
May 2007
The first release of
05-01-07.itl was to make it work like english_v85.tml
05-01-07.itl
The Point Name List
was filled out with the new names
End
Conditions
Developed to match
Roadway Design Guidelines and C-Standards
Misc
Components
The Curbing Component
gave us the ability to change the names
They were developed
to take advantage of affixes
Pavements
The Pavement
Components in this folder match Bentley's default names
Templates
The Pavement Points
did not change (TLOEPFG, TRIEPFG, etc.)
The Pavement
Component is PSS - 1.25' PSS Thickness
Template
Parts
Parts used to Constuct the Templates
Style
Manager
Styles match the
Point Name List
Point Names are
available in file PointNames.xls
The Documentation
folder has Bentley's default documentation
There are design
files in directory ADOT_Point_Names
04-16-07
preferences.xin
named symbology still shows PSS#1
edit it from PSS#1 to
PSS
rename style manager symbology to PSS
changes to
04-13-07.itl
Pavements
8' Shoulder should
have been horizontal 15.50 from " " vector-offset .875'
merge points 11 and 21,
delete 11
Name,
Description
10 1/2" AB, New for
RB - Rural 40' Section
12' Travel Lane, New
for RB - Rural 40' Section
2 1/2" AC, New for RB
- Rural 40' Section
2" AC, New for RB -
Rural 40' Section
8' Shoulder, New for
RB - Rural 40' Section
Last things to do: UD
(1) and UD (2)
04-19-07
(1) ULTIMATE, Urban
Freeway Ultimate Facility
(2) INTERIM, Urban
Freeway Interim Facility
04-13-07
Updated all preferences.xin and 04-13-07
Deleted UA with
Sidewalk, UB with Sidewalk and UC with Sidewalk refer to figure
306.4
Style and Named Symbology Manager
Created PSS –
Pavement Structural Section
Component Style for
all templates
04-12-07
preferences.xin
Evaluation>Profile>Annotate
Profile
Set preference for
Superelevation
Percent of Frame Used
by Diagram: 38%
03-31-07
Created Style
Manager
Name: Toe of
Slope
Desc: Tie's Cut
and Fill Lines together in Plan
View
Surface
Feature>Settings
3D/Plan
Display
Line
Segments, Points, Annotation
Cross Section
Display
Crossing
Points
Profile
Display
Crossing
Points
Created Named
Symbology Manager
Name: Toe of
Slope
Desc: Toe of Slope
Surface
Feature>Symbology
Plan Line
Symbology; lv=4, co=4, lc=0,
wt=0
03-20-07
Placed all new
curbing in .itl file
Updated InRoads.cel with New Curbing and End
Conditions
Completed all rural
and interstate templates
Placed New Sidewalk
in the Style and Named Symbology
Managers
Revised Single Curbs
with Gutter Depression N/A, so 0% slope
Single Curb Types A,
A-1 & G, Curb and Gutter Types D-3 and C-1
Created UA, UA Lt, UA
Rt and UA with
Sidewalk
Created UC and UC
with Sidewalk
Curbing Outside Type
D
Created UB and UB
with Sidewalk
Curbing Outside Type
D
Created End Condition
6:1, Urban 6:1 Slopes Desirable
Created Misc Component
2.00' Segment, 2.00'
at 0.01' Per Ft
Gave Names for the
Curbing Components
02-17-07
Style Manager/ Named
Symbology Manager>Re-created
Aggregate
Asphalt
Base
Checked all previous
changes
InRoads.cel>updated
New cell: point:
InRoads Cross Section Point
lv=304, co=By Level,
wt=0, lc=0
Style
Manager
Named Symbology Manager
Name:
point
Desc: InRoads Cross Section Point
lv=304, xs=.1, ys=.1 and zs=.1
02-01-07
Deleted from the
Preference Manager any preference named metric
Style Manager/ Named
Symbology Manager>New for display with
tutorial
Aggregate
Asphalt
Base
01-30-07
Finished Documenting
InRoads Survey FWF File; V8PCodes2.fwf
Translated to xin
Copy Preference
Add-In to incorporate into preferences.xin
Output to preferences_with_survey.xin
01-19-07
Installed
InRoads Version 08.09.00.51
01-10-07
Downloaded
InRoads for MicroStation XM
12-13-06
Bentley
Released InRoads for MicroStation XM